Chapter 5
ibrd
The ibrd command causes a GPIB device to receive data from another GPIB
device. The following example illustrates the use of the ibrd function.
dev1:
ibrd 20
[2100] (end cmpl)
count: 18
4e 44 43 56 28 30 30 30
2e 30 30 34 37 45 2b 30
0d 0a
This command acquires data from the device and displays it on the screen in hex
format and in its ASCII equivalent, along with information about the data
transfer, such as the status word and the byte count.
© National Instruments Corp.
ibic—Interface Bus Interactive Control Utility
N D C V ( 0 0 0
. 0 0 4 7 E + 0
• •
5-17
NI-488.2M SRM for OS/2