Removing The Spacer Table - Roland VersaUV LEF2-300 Regular Maintenance Manual

Removing the Spacer Table

CAUTION
Procedure
A
Turning on the sub power
B
Press [SETUP].
[SETUP] starts to flash.
C
Press [DOWN] or [▼] to move the flat table to the lowest and frontmost (forward) position.
D
Remove the screws securing the rear side of the spacer table.
E
Press [▲] to move the flat table backwards about 100 mm (3.94 in).
F
Remove the screws securing the front side of the spacer table.
Sharp components
Take care to prevent injury from touching the sharp edges of the spacer table.
Spacer Table Attachment/Removal
1.Introduction
7