Roland VersaUV LEF2-300 Regular Maintenance Manual page 25

Q
When the following screen is displayed, open the front cover.
REMOVE HEAD
REFRESHER
R
Open the sheet retaining cover and remove the head cleaning sheet.
Remove the sheet by pinching parts that are clean of ink and cleaning liquid. Use tweezers or gloves if
getting cleaning liquid on your hands seems unavoidable.
S
Check that there are traces of ink being wiped off onto the head cleaning sheet.
IMPORTANT
Quickly dispose of used head cleaning sheets.
Leaving a used head cleaning sheet inside the machine may lead to the machine's painting peeling off.
To purchase head cleaning sheets, contact your authorized Roland DG Corporation dealer or visit our website
(http://www.rolanddg.com/).
Point
• If there are minor traces of ink being wiped off onto the sheet, head refreshing has failed. Check the
following points, and then perform head refreshing again.
¾ Has the head cleaning sheet been attached in the correct position?
¾ Is the head cleaning sheet loose?
¾ Has cleaning liquid soaked into the entirety of the head cleaning sheet?
¾ Has too much cleaning liquid been applied? (The appropriate amount is two [A] or three [B] drops per
cleaning pad.)
• Cleaning pads cannot be used if they are severely deformed (warped or tilted) or are coming free of the unit.
Replace the cleaning pad unit. For information on replacement, contact your authorized Roland DG
Corporation dealer.
Maintenance That Must Be Performed Daily
2.Regular Maintenance
23