Roland VersaUV LEF2-300 Regular Maintenance Manual page 19

MEMO
If the printing-test results are difficult to interpret
Check the results in a bright location, changing your line of vision. They are visible using the reflection of the light.
C
Press [ ].
D
Select the group of print heads to clean.
Press [ ] or [ ] to select the group of print heads that is not to be cleaned.
1
NORMAL CL.
AB
Press [ ] or [ ] to get rid of the group display.
2
NORMAL CL.
A
Repeat steps
3
Only the displayed groups will be cleaned. If A and B are displayed, they will both be cleaned.
E
Press [ENTER].
The screen shown below appears, and then cleaning starts. The (approximate) remaining time for the
procedure is displayed on the screen. (The display shown below is an example. "01:45" = "1 minute
and 45 seconds")
CLEANING...
>> 01:45
When finished, the screen shown below appears again.
NORMAL CL.
AB
F
Press [ ] twice.
G
Display the printing test menu.
TEST PRINT
Press [ ] several times to display the screen shown below.
It is difficult to check the white ink if the paper for use in the printing test is white. We recommend
printing on transparent paper.
CLEANING
TEST PRINT
TEST PRINT 2
Press [ ] several times to display the screen shown below.
Because white ink is printed on a black undercoat, white ink can be easily checked even when printed
on white paper. However, printing takes longer than "TEST PRINT."
CLEANING
TEST PRINT2
and to display only the group of print heads that requires cleaning.
1 2
Maintenance That Must Be Performed Daily
2.Regular Maintenance
17