Roland VersaUV LEF2-300 Regular Maintenance Manual page 21

IMPORTANT
Continue using the same head refresher with a single machine. Using a head refresher with multiple machines
may lead to print head malfunctions.
IMPORTANT
Be sure to hold the handle of the front cover and open and close it gently.
Procedure
A
If the following message is displayed, press [ENTER].
If this message is not displayed, start from step
DO HEAD REFRESH
B
Press [ ] or [ ] to select "YES."
DO REFRESH?
[YES] NO
MEMO
Selecting "NO" returns the display to the top menu. However, the same message will be displayed
once a certain amount of time has passed and in specific situations (such as before the start of manual
cleaning and during wiper replacement). Head refreshing is an important operation that keeps the print
heads in good condition. Perform this operation with as close to the appropriate timing as possible.
C
Press [ENTER].
G
Proceed to step .
D
Press [FUNCTION].
E
Press [ ] to display the screen shown below.
CLEANING
HEAD REFRESH
F
Press [ENTER].
G
When the following screen is displayed, open the front cover.
SET HEAD
REFRESHER
H
Check that nothing has been placed on top of the flat table.
Remove any objects to be printed on and jigs that are present.
Maintenance That Must Be Performed Daily
D
.
2.Regular Maintenance
19