Removing The Packing Materials 1; Removing Tape And Packing Materials From The Front Cover And Print Head - Roland FLATJET Series Setup Manual

3. Removing the Packing Materials 1

Removing Tape and Packing Materials from the Front Cover and Print Head

Tape and packing materials are attached to the machine to protect it from vibration during transportation. When
installation is complete, remove them.
CAUTION
Remove all packing materials. Any that remain may cause faulty operation or breakdown when the power is
switched on.
Store the packing materials carefully, because they are needed again when transporting the machine for relo-
cation or the like.
24
Be sure to remove the packing materials according to the procedure.
Failure to follow the procedures may cause sudden operation or the like of the machine,
which may result in unexpected injury.
Packing materials
Screws
Remove the packing materials from the
front cover.
Remove the cover on the right side of
the machine.
Packing materials
Remove the packing materials from the
print head.