Manual Cleaning
B
Move the print-head carriage.
Press [MENU].
1
Press [ ] several times to display the screen shown below.
2
MENU
SUB MENU
Press [ ] once, and then press [ ] several times to display the screen shown below.
3
SUB MENU
MAINTENANCE
Press [ ] to display the screen shown below.
4
MAINTENANCE
CLEANING
Press [ENTER].
5
After "NOW PROCESSING.." is displayed and the print heads move, the screen shown below
appears.
OPEN MAINTENANCE
C
Open the front cover.
D
Open the maintenance cover.
Remove the screw on the top of the maintenance cover, tilt the maintenance cover forward slightly,
and then pull out the maintenance cover in the direction indicated by the arrow.
The screen shown below appears.
FINISHED?
IMPORTANT
Do not press [ENTER] at this stage. Press [ENTER] after cleaning is complete. If you press [ENTER] at this stage, the
screen shown below appears. Select [NO] and start over from the beginning.
DO REFRESH?
[YES]
26
COVER
NO
2.Regular Maintenance