Manual Cleaning
H
Clean the locations shown in the following figure.
Only stroke the sponges gently, do not rub them forcefully.
I
When you have finished cleaning, close the maintenance cover.
J
Close the front cover.
K
Press [ENTER].
The screen shown below appears. Proceed to step
DO REFRESH?
[YES]
2.
Perform head refreshing.
" P. 18 "Head Refreshing Method"
3.
Perform a printing test to check the results.
Procedure
A
Attach the spacer table.
B
Load the object to be printed on.
C
Set the print area.
D
Press [FUNCTION], and then press [ ].
28
NO
2.Regular Maintenance
B
in
P. 18 "Head Refreshing Method"
.