Roland VersaUV LEF2-300 Regular Maintenance Manual page 23

K
Remove the head refresher cover.
IMPORTANT
Do not place the cover on the flat table.
The cover being pinched between the head refresher and a part of the machine may lead to malfunctions. To
avoid the risk of malfunctions, do not place the cover on the flat table.
L
Attach the head cleaning sheet to the head refresher.
Open the sheet retaining cover.
1
Place the head cleaning sheet on the wiping part of the head refresher.
2
Place the sheet so that it is aligned with the front position aligning tab (A) and its corners are inside
the L-shaped marks.
Close the sheet retaining cover to secure the head cleaning sheet in place.
3
Secure the sheet to prevent it from loosening.
Point
To use the head refreshing function to its full effect, make sure that the head cleaning sheet is firmly
fixed in place, with no slack. Failing to secure the sheet sufficiently will not only prevent you from
obtaining the full effect of head refreshing but may also lead to print head malfunctions.
M
Press [ENTER].
SET HEAD
REFRESHER
N
When the following screen is displayed, apply head refreshing cleaning liquid to the head
cleaning sheet.
APPLY CL-LIQUID
START REFRESH
Maintenance That Must Be Performed Daily
2.Regular Maintenance
21