Initializing The 8672Atme And 8672Atmm Modules - Nortel 8600 Series Installing

104 Installing Ethernet Routing Switch 8600 modules and connecting equipment
module
8672ATMM
8683POSM
For more information about the PCMCIA slot and the 8691SF or 8692SF
module, refer to
slot" (page 72)
The following sections describe the initialization process for the 8672ATME,
8672ATMM, and 8683POSM modules.

Initializing the 8672ATME and 8672ATMM modules

The 8691SF or 8692SF module retrieves the image file to download to the
8672ATME or 8672ATMM module. First, the 8691SF or 8692SF module
searches the host flash memory for the file, and then the PCMCIA card. The
8691SF or 8692SF module downloads the image file to the 8672ATME, or
8672ATMM and identifies which MDAs are installed. The screen displays
a message similar to the following:
Using image = /slot/p80t4100.dld for ATM card download.
ATM card:
If the image file is not found in either the flash memory or the PCMCIA, the
system stops and the screen displays an error message such as:
ERROR Task=rcStart Couldn't find an ATM download image!
Aborting card initialization in Slot=4
or:
ERROR Task=rcStart portPresent:port=X/X, invalid port Type
The 8672ATME or 8672ATMM module requests a redownload from the
switch fabric module, and the screen displays the following message:
Redownload requested by ATM card in slot <number>.
If the image download is unsuccessful, the screen displays the following
message:
ATM card in slot <number> not ready.
If there are three unsuccessful attempts to download, the screen displays
the message shown in
(page
Copyright © 2007, Nortel Networks
.
"PCMCIA card slot" (page 66)
(8692SF).
Slot 4 MDA [OC-12c MM] [Quad OC-3c MM] Ver=2.2
Figure 53 "Unsuccessful download screen output"
105).
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
Image filename
p80t4100.dld
p80p4100.dld
(8691SF) or "PCMCIA card
Nortel Networks Confidential