8632Txe And 8632Txm Modules - Nortel 8600 Series Installing

•
•
The 8630GBR module supports R and M mode. For specific R and M mode
configuration requirements, see
24)

8632TXE and 8632TXM modules

Both the 8632TXE and 8632TXM modules
module" (page
ports using 8-pin modular (RJ-45) connectors, Ports operate at either 10
Mb/s or 100 Mb/s up to distances of 100 m with Category-3 or greater
unshielded twisted pair (UTP) cable.
Additionally two bays are provided for 1000BASE-X gigabit Ethernet
interface connectors (GBICs).
Figure 16
8632TXE/8632TXM module
The 8632TXE and 8632TXM module ports support the IEEE 802.3 1998
Clause 28 auto-negotiation standard. Each port can operate in full- or
half-duplex mode. When a port is connected to another device that also
supports the IEEE 802.3 1998 Clause 28 auto-negotiation standard, the
two devices negotiate the highest possible data rate and the duplex mode
of operation.
Copyright © 2007, Nortel Networks
.
M mode (128,000 table entries) supports up to 128,000 hardware
records. This mode supports M and R modules only.
R mode supports up to:
— 256,000 IP routes
— 64,000 MAC entries
— 16,000 ARP entries
This mode supports R modules only.
and "R mode configuration requirements" (page
41)) provide 32 autonegotiating 10BASE-T/100BASE-TX
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
8632TXE and 8632TXM modules 41
"M mode configuration requirements" (page
25).
(Figure 16 "8632TXE/8632TXM
Nortel Networks Confidential