Nortel 8600 Series Installing page 76

76 Installing Ethernet Routing Switch 8600 modules and connecting equipment
3
4
5
6
Copyright © 2007, Nortel Networks
.
Save bootconfig to file /flash/boot.cfg successful.
Enter the show sys sw command and note the software release
running on the CPU, and the location for the files:
• PrimaryImageSource : /flash/p80a4100.img runtime image
name and location
• PrimaryConfigSource : /flash/config.cfg: the runtime config file
name and location
You may have to delete old files from the PCMCIA card to make
room for the new files. You can use the remove command.
You must copy all required files from the CPU flash memory to the
PCMCIA card. First, copy the boot and runtime configuration files to
the PCMCIA card.
Enter the following commands:
ERS-8606:6# copy /flash/boot.cfg /pcmcia/
ERS-8606:6# copy /flash/config.cfg /pcmcia/
Copy hidden files to the PCMCIA card. Enter the following
commands:
ERS-8606:6# copy /flash/shadov.txt /pcmcia/
ERS-8606:6# copy /flash/snmp_usm.txt /pcmcia/
ERS-8606:6# copy /flash/snmp_comm.txt /pcmcia/
If the switch is in hsecure mode, you must also copy the password
file. Enter the following command:
ERS-8606:6# copy /flash/passvord.txt /pmcia/
Copy image files from flash memory to the PCMCIA card. Enter
the following commands:
To copy the runtime image:
ERS-8606:6# copy /flash/p80a4100.img /pcmcia/
To copy the boot monitor image:
ERS-8606:6# copy /flash/p80b4100.img /pcmcia/
To copy the ATM IO image if an ATM card is present:
ERS-8606:6# copy /flash/p80t4100.img /pcmcia/
To copy the encryption module image:
ERS-8606:6# copy /flash/p80c4100.img /pcmcia/
To copy the AES encryption module :
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
Nortel Networks Confidential