Nortel 8600 Series Installing page 27

Figure 3
8608GBE/8608GBM module LEDs
Table 3 "8608GBE/8608GBM module LEDs" (page 27)
8608GBE and 8608GBM module LEDs.
Table 3
8608GBE/8608GBM module LEDs
Type Label
Port TX
RX
Module Online
The 8608GBE module supports up to 32,000 table entries in its forwarding
engine. Refer to Network Design Guidelines for usage of table entries.
Copyright © 2007, Nortel Networks
.
Color/State
Green/Blinking
Amber/Steady
Off
Green/Steady
Green/Blinking
Amber/Steady
Off
Green/Steady
Amber/Steady
Off
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
8608GBE and 8608GBM modules 27
describes the
Meaning
The port is transmitting data.
A fault condition exists on the line or on
the attached remote device.
The port has not detected a fault
condition.
The port has a link and is enabled.
The port is receiving data.
The port has either no optical signal or
no link synchronization.
The port has signal but no link.
The module has completed its power-on
self-test and software initialization and
is operating normally.
The module failed its power-on self-test.
The switch power is off. If the switch
power is on, the module is going
through its power-on self-test and
software initialization. A module in this
state is not yet functional.
Nortel Networks Confidential