Leds - Nortel 8600 Series Installing

To upgrade to the 8692SF module, refer to Release Notes for the Ethernet
Routing Switch 8600 Software Release 4.1.

LEDs

Figure 35 "8692SF module LEDs" (page 69)
8692SF module LEDs.
Figure 35
8692SF module LEDs
The Switch LEDs and the CPU LEDs serve as a bar graph to indicate card
activity. The Switch bar graph increases as the switch fabric utilization
increases. The CPU bar graph increases when the CPU is actively
performing tasks, such as learning media access control (MAC) addresses,
updating routing tables, or interacting with the device management station.
Table 25 "8692SF module LEDs" (page 69)
LEDs.
Table 25
8692SF module LEDs
Label
Mz
Link
Copyright © 2007, Nortel Networks
.
Color/State
Green
Off
Green/Steady
Off
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
shows the location of the
describes the 8692SF module
Meaning
The module completed software initialization
and is operating normally.
The module is not installed or did not initialize
properly.
The management port is connected, and the
link is good.
There is no link to the management port.
8692SF module 69
Nortel Networks Confidential