Introduction; Regulatory Information - Nortel 8600 Series Installing

Introduction

The Nortel 8000 Series chassis provides the physical enclosure for the
8000 Series switch modules. When Ethernet Routing Switch 8600 modules
are installed in the chassis, the resulting Ethernet Routing Switch 8600
provides a range of data speeds and high-performance switching and
routing features.
This guide provides instructions for installing the Ethernet Routing Switch
8600 modules in a 8000 Series chassis.
This guide is intended for qualified service personnel who need to install
or replace a Ethernet Routing Switch 8600 modules in the chassis. A
qualified service person should have appropriate technical training and
experience and be aware of the hazards involved in installing and replacing
customer-replaceable units.
For a list of related publications, see the release notes that accompany
your software.

Regulatory information

International regulatory statements of conformity
This is to certify that the Nortel Networks 8000 Series chassis and
components installed within the chassis were evaluated to the international
regulatory standards for electromagnetic compliance (EMC) and safety and
were found to have met the requirements for the following international
standards:
•
•
•
Further, the equipment has been certified as compliant with the national
standards as detailed below.
Copyright © 2007, Nortel Networks
.
EMC - Electromagnetic Emissions – CISPR 22, Class A
EMC - Electromagnetic Immunity – CISPR 24
Electrical Safety – IEC 60950, with CB member national deviations
Nortel Ethernet Routing Switch 8600
Installing Ethernet Routing Switch 8600 Modules
NN46205-304 01.03 Standard
4.1 2 January 2007
9
Nortel Networks Confidential