Option Feeder - Xerox Phaser 6600 Service Manual

General Information
The Developer HVPS (PL18.1.14) provides high voltage to the Magnet Roller and BCR found in each
Imaging Unit.
The EEPROM Board (PL18.1.43) is non-volatile memory that stores machine information.
The Wireless Kit (PL18.1.27) is the adapter that controls the interface to the Wireless Network.

Option Feeder

Turn Roller Clutch
Feed Clutch
550 Option Drive Assembly
H Feed Board
550 Option Feeder Board (PL10.1.10) controls each component in the optional tray.
The Turn Roller Clutch (PL10.1.8) transfers the drive of the 550 Option Drive Assembly to the Turn
Roller.
550 Size Switch Assembly (PL10.1.11) detects paper size, and presence or absence of paper in the 550
paper cassette.
550 Option Drive Assembly (PL10.1.9) consists of a DC motor that drives each Roller of the paper feed
section in the optional tray.
550 Pinch Chute Assembly (PL10.2.1)
The 550 Pinch Chute Assembly mainly consists of the following components.
• No Paper Sensor
By changes of the actuator, detects presence or absence in the paper cassette.
• Regi Sensor
Detects that a lead edge of a sheet has reached the registration section.
• Feed Clutch (PL10.2.2)
Transfers the drive of the 550 Option Drive Assembly to the Feed Roller.
1-48 Phaser 6600 and WorkCentre 6605
Service Manual
No Paper Sensor
Registration Sensor
550 Size Switch Assembly
550 Pinch Chute Assembly
Xerox Internal Use Only
s6600-254