Option Feeder; Optional 550-Sheet Feeder / Joint Screw - Xerox Phaser 6600 Service Manual

Option Feeder

Optional 550-Sheet Feeder / Joint Screw

PL10.1.1 / PL10.1.17
1. Remove the 550-sheet Paper Tray from the printer.
2. Remove the two Joint Screws (PL10.1.17) that attach the Optional 550-Sheet Feeder (PL10.1.1) to
the printer.
WARNING: The Fuser is very hot. Take added care when handling the fuser to avoid being burned.
3. Raise the printer while holding the recessed areas on both sides, and separate it from the Optional
550-Sheet Feeder.
Note: Although the illustration shows the MFP, the procedure details apply equally to the SFP.
Xerox Internal Use Only
Front
Service Parts Disassembly
s6600-118
Phaser 6600 and WorkCentre 6605
Service Manual
4-53