Service Parts Disassembly
Bypass Tray Pinch Roller
(PL13.3.9)
1.
Remove the Bypass Tray Assembly. (page 4-71)
2.
Turn over the Bypass Tray Assembly.
3.
Remove the pinch spring from the roller being removed.
4.
Remove the Bypass Tray Pinch Roller (PL13.3.9).
Replacement Note:
in the springs when removing, and use caution not to confuse the springs when reinstalling.
4-76
Phaser 6600 and WorkCentre 6605Xerox Internal Use Only
Service Manual
TA2 Pinch Springs
The TA1 and TA2 Pinch Springs are not the same. Carefully note the difference
TA1 Pinch Springs
s6600-180