Bypass Tray; Ta1 Roller Assembly - Xerox Phaser 6600 Service Manual

Bypass Tray

TA1 Roller Assembly

PL13.1.2
1. Remove the Bypass Tray Frame Assembly. (page 4-65)
2. Release the hook holding the Turn Gear (PL13.1.7) and remove the gear.
3. Unlock the TA Bearing (PL13.1.6) and remove it by rotating it.
4. Unlock the Duplex Bearing (PL13.1.1), rotate it, and then slide it onto the shaft.
5. Slide the TA1 Roller Assembly (PL13.1.2) to the left and remove it from the end of the right shaft.
Xerox Internal Use Only
TA Bearing
Service Parts Disassembly
TA1 Roller
Duplex Bearing
Phaser 6600 and WorkCentre 6605
Service Manual
Front
s6600-126
4-63