Duplex Chute Assembly Kit - Xerox Phaser 6600 Service Manual

Service Parts Disassembly

Duplex Chute Assembly Kit

(PL15.1.2) / (PL15.1.3)
WARNING: The Fuser is very hot. Take added care when handling the fuser to avoid being burned.
1. Remove the Fuser Assembly. (page 4-46)
2. Remove the Transfer Roller. (page 4-79)
3. Remove the Waste Cartridge. (page 4-50)
4. Remove the Waste Cartridge Lock. (page 4-39)
5. Remove the Front Door Assembly. (page 4-128)
6. Remove the Right Cover Assembly. (page 4-131)
7. Remove the Left Cover Assembly.
8. Remove the IP Board.
9. Remove the Duplex Assembly. (page 4-77)
10. Release the screw (silver, tapping, 8mm) that attaches the Lower A Duplex Chute (PL15.1.3),
release the two hooks and remove the Upper Duplex Chute together with the Lower A Duplex
Chute.
4-84 Phaser 6600 and WorkCentre 6605Xerox Internal Use Only
Service Manual
(SFP page 4-134;
(SFP page 4-102; MFP
MFP page 4-136)
page 4-104)
s6600-140