Exit
Exit Assembly
(PL17.1.1)
WARNING:
The Fuser is very hot. Take added care when handling the fuser to avoid being burned.
1.
Remove the Right Cover Assembly. (page 4-131)
2.
Remove the Exit Cover. (page 4-125)
3.
Remove the two screws (silver, 6mm) that attach the Exit Assembly (PL17.1.1) to the printer and
remove the Exit Assembly.
4.
Unplug connectors P/J151 and P/J154 of the Exit Assembly.
5.
Remove the two screws (silver, tapping, 8mm) that attach the Exit Tray Cover (PL17.1.20) to the
Exit Assembly and remove the cover.
Xerox Internal Use Only
Service Parts Disassembly
Phaser 6600 and WorkCentre 6605
Service Manual
Rear
s6600-084
4-93