Sales Order Screen; Figure 48 - Sales Order Screen - York YK Style H Operation Manual

FORM 160.76-O2
issue date: 6/15/2015

FIGURE 48 - SALES ORDER SCREEN

OVERVIEW
This screen allows definition of the sales order param-
eters. The commissioning date is entered by the Ser-
vice Technician at the time of chiller commissioning.
These values should never be changed or entered by
anyone other than a qualified Service Technician. En-
try instructions are included in the OptiView Control
Center – Service Instructions (Form 160.76-M1). The
remainder of the values are entered at the YORK Fac-
tory during the manufacturing of the chiller.
When changing a Microboard it may be necessary to
enter all of these parameters in the field. The Service
Technician can request an Admin Password to allow
editing of all fields.
DISPLAY ONLY
Model Number
Factory defined model number of the chiller system.
Panel Serial Number
Factory defined serial number for the micropanel.
Chiller Serial Number
Factory defined serial number for the chiller system.
JOHNSON CONTROLS
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION

SALES ORDER SCREEN

YORK Order Number
Factory defined order number under which the chiller
was sold.
System Information
Factory defined conditions for which the chiller was
originally rated and sold.
Condenser and Evaporator Design Load
Information
Factory defined description of the condenser and evap-
orator configuration at time of shipment.
Nameplate Information
Factory defined information about the chiller motor
configuration.
LD19465
For fields requiring access level of SER-
VICE. Service Technicians refer to the
OptiView Control Center - Service Instruc-
tions (Form 160.76-M1) for operation
instructions and explanation of all pro-
grammable setpoints and displayed values.
2
139