Picture Controls Menu - Extron electronics ISS 608 User Manual

Picture Controls Menu

From the Picture Controls menu
picture settings such as brightness and
contrast can be adjusted, as well as
perform a one-time Auto-Image on the
selected video bus.
From the Picture Controls menu,
•
press NEXT to move to the desired
submenu.
• Within the submenu, use the
ADJUST knobs to select and change
values as required.
• Press MENU to exit the submenu.
NOTE: If a value is a default value,
an asterisk appears next to the
value. For example:
• Brit (brightness) = *064
Cont (contrast) = *064
•
Detail = *064
•
Auto-Image
Auto-Image automatically sizes and positions incoming video signal to fill the channel
window when a new input signal is detected.
Rotate either ADJUST knob to select Yes or No to perform an Auto-Image on the
selected video bus.
Brightness and Contrast
This submenu is used to adjust the brightness and contrast of the input signal. To use this
submenu:
Rotate the horizontal ( [ ) ADJUST knob to change the brightness of the video for the
•
selected input. The range of settings is 000 to 127. The default is *064.
• Rotate the vertical ( { ) ADJUST knob to change the contrast of the video for the selected
input. The range of settings is 000 to 127. The default is *064.
Detail
This submenu is used to adjust the detail of the input signal.
Rotate either ADJUST knobs to adjust the detail of the video for the selected input. The
•
range of settings is 000 to 127. The default is *064.
MENU Picture
Controls
NEXT
Menu
Select Output
Preview
Rotate to
NEXT
Menu
or select Program
or Preview
Auto Image
No
Rotate to
Menu
select Yes
or
or No
NEXT
Brit Cont
*064 *064
Rotate
NEXT
Menu &
Rotate
Detail
*064
Rotate to
NEXT
or adjust the sharpness
Menu
of the image
Figure 12. Picture Controls Menu
ISS 608 Seamless Switcher • Operation
MENU
NEXT w Yes
selected
Press Next
to Confirm
NEXT
to adjust brightness
to adjust contrast
16