Extron electronics ISS 608 User Manual page 65

Command
LAN/IP Configuration and Setup (continued)
Set IP address
Query IP address
Set subnet mask
Query subnet mask
Set gateway IP address
Query gateway IP address
Set DNS server IP address
Query DNS server IP
address
Query hardware MAC
address
Query connection listing
Restart the network
Set IP address, subnet
mask, gateway
View IP address, subnet
mask, gateway
Setting any values with a CISG command changes the DHCP seeing to Off and Cisg response is followed by Boot2 response (when in
NOTE:
verbose mode 2 or 3).
X9!
KEY:
= IP Address (xxx.xxx.xxx.xxx) Leading zeros in each of the 4 fields are optional in setting values and are
expressed in returned values: Factory Default IP address: 1
Default Gateway IP address:
X9@
= Subnet mask (xxx.xxx.xxx.xxx). Leading zeros in each of the 4 fields are optional in setting values and are
expressed in returned values. Default subnet mask:
X9#
= Hardware (MAC) address (
Passwords
The following rules apply to passwords:
NOTE:
•
Length is 1-128 characters.
•
All human-readable characters are permitted except |.
•
The password cannot be a single space.
•
Passwords are case-sensitive.
•
A user password cannot be assigned if no administrator password exists. An E14 error code is returned.
•
If the Admin password is cleared, the user password is cleared as well.
•
The factory configured passwords for all accounts on this device have been set to the device serial number. In the event of a complete
system reset, the passwords convert to the default, which is no password.
Set administrator
password
Clear administrator
password
Query administrator
password
Set user password
Clear user password
Query user password
X8%
KEY:
= Password
ASCII (Telnet)
(host to switcher)
E X9! }
CI
E }
CI
E X9@ }
CS
E }
CS
E X9! }
CG
E }
CG
E X9! }
DI
E }
DI
E }
CH
E }
CC
E }
2BOOT
E X9! X9@ X9! }
1* * * CISG
E }
1CISG
Example:
0.0.0.0
, Default DNS Server IP address:
00-05-A6-##-##-##
EX8% }
CA
E }
•CA
E }
CA
E X8% }
CU
E }
•CU
E }
CU
0 128
Maximum length is to characters. All alpha-numeric characters permitted except |, and
"space".
Response
(switcher to host)
X9!]
Ipi•
X9!]
X9@]
Ips•
X9@]
X9!]
Ipg•
X9!]
X9!]
Ipd•
X9!]
X9#]
{number of connections}
]
Boot2
Cisg1*IP/subnet bits*gateway
/
IP subnet bits*gateway
192.168.254.254/16*0.0.0.0
92.168.254.254,
0.0.0.0.
255.255.0.0.
).
X8%]
Ipa•
]
Ipa•
X8%]
X8%]
Ipu•
]
Ipu•
X8%]
ISS 608 Seamless Switcher • SIS Configuration and Control
Additional description
Default = 192.168.254.254
Default = 255.255.255.0
Default = 0.0.0.0
Default = 0.0.0.0
]
]
]
]
57