Internal Web Page; Accessing The Internal Web Page - Extron electronics ISS 608 User Manual

Internal Web Page

The ISS 608 scaler features an internal web server, displayed as a web page. This page
allows you to monitor and adjust certain settings of the ISS 608 via a LAN or WAN
connection. Use a web browser to view the pages on a PC connected to the scaler LAN
port.
This section gives an overview of the internal web page, which is always available and
cannot be erased or overwritten. Topics in this section include:
•
•

Accessing the Internal Web Page

Access the ISS 608 internal web page as follows:
1.
2.
3.
4.
5.
Accessing the Internal Web Page
Web Page Panels
Connect the ISS to a LAN or WAN using the rear panel RJ-45 LAN connector (see
figure 2,
on page 6).
G
Open a web browser on a PC connected on the same LAN or WAN.
Enter the ISS 608 IP address in the browser Address field.
NOTE: If the local system administrators have not changed the value, the factory-
specified default is 192.168.254.254.
Press the <Enter> key on the keyboard.
The ISS checks to see if it is password protected.
• If the ISS is not password protected, the web page opens.
If the device is password protected, enter a user name entry (user or admin) in
•
the Username field and the password in the Password field when prompted (see
figure 40).
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is no password.
Figure 40. Network Password Prompt
Click the Sign in button, if a the unit is password protected.
ISS 608 Seamless Switcher • Internal Web Page 67