Configuring And Recalling A Logo Preset - Extron electronics ISS 608 User Manual

Default
Cycle
Menu
Figure 22.
To recall or save a layout preset:
Press the RECALL/SAVE button (see figure 22) to go to the Recall Layout menu.
1.
2. Rotate either ADJUST knob to select a saved layout preset.
3. Press the ENTER button to recall the selected preset to the preview output.

Configuring and Recalling a Logo Preset

NOTE: User images must first be uploaded via Extron Product Configuration Software
(PCS) available at www.extron.com.
To configure a logo preset:
1. Press the MENU button to go to the
Background/Logo Configuration menu.
2. Press the NEXT button to go to the Logo
Select submenu.
3. Rotate the horizontal ( [ ) ADJUST knob to
select the logo preset to configure.
4. If needed, rotate the vertical ( { ) ADJUST knob
to change the assigned image file (the image
file shows on the preview output).
5. Press the NEXT button to adjust the position of
the logo.
6. Rotate the ( [ ) ADJUST knob to adjust the
horizontal (H) position and rotate the ( { )
ADJUST knob to adjust the vertical (V) position.
Press the NEXT button to select a Logo Key
7.
Effect, if desired.
Rotate either ADJUST knob to select the Logo Key Effect:
8.
• Transparency — Applies a transparency level (0-255) to the entire graphic. A setting
of 0 transparency indicates 100% opacity. No content below the graphic is mixed.
• RGB — Defines an RGB color (0-255) to be keyed out of the image. This setting
supports signals which may have color noise or slight variance in brightness.
• Level — Defines a luminance level (0-255) in which any video information with a
luminance below the defined value will be keyed out of the layer
Alpha — Uses the alpha layer data found in the graphic file. Only PNG files containing
•
alpha data will be supported.
Press
Recall/Save
Recall Layout
N/A
ENTER
Rotate either to select.
or
Press ENTER to recall
or save the layout
Preset ###
Recalled
1 sec.
Recall/Save Menu
Default
Cycle
Press and Hold
Recall/Save
2 sec.
Menu
Save Layout
N/A
ENTER
or
Preset ###
Saved
1 sec.
MENU
Background Logo
Configuration
NEXT
Menu
Background Sel.
IMG: Unassigned
Menu
NEXT
Logo Select
01: Unassigned
NEXT
Menu
H Logo Pos V
+0000
NEXT
Menu
Logo Key Effect
Off
Menu NEXT
Figure 23. Configure Logo
ISS 608 Seamless Switcher • Operation
Rotate to select
type
&
Rotate to adjust color
or image file
Rotate to select preset
&
Rotate to assign the
image file
+0000
Rotate to adjust
horizontal value
&
Rotate to adjust
vertical value
Rotate to
select logo
or
key effect
31