Picture Controls Menu
From the Picture Controls menu
picture settings such as brightness and
contrast can be adjusted, as well as
perform a one-time Auto-Image on the
selected video bus.
From the Picture Controls menu,
•
press NEXT to move to the desired
submenu.
•
Within the submenu, use the
ADJUST knobs to select and change
values as required.
•
Press MENU to exit the submenu.
NOTE: If a value is a default value,
an asterisk appears next to the
value. For example:
Brit (brightness) = *064
•
Cont (contrast) = *064
•
Detail = *064
•
Auto-Image
Auto-Image automatically sizes and positions incoming video signal to fill the channel
window when a new input signal is detected.
Rotate either ADJUST knob to select Yes or No to perform an Auto-Image on the
selected video bus.
Brightness and Contrast
This submenu is used to adjust the brightness and contrast of the input signal. To use this
submenu:
Rotate the horizontal ( [ ) ADJUST knob to change the brightness of the video for the
•
selected input. The range of settings is 000 to 127. The default is *064.
•
Rotate the vertical ( { ) ADJUST knob to change the contrast of the video for the selected
input. The range of settings is 000 to 127. The default is *064.
Detail
This submenu is used to adjust the detail of the input signal.
Rotate either ADJUST knobs to adjust the detail of the video for the selected input. The
•
range of settings is 000 to 127. The default is *064.
MENU
Picture
Controls
NEXT
Menu
Select Output
Preview
NEXT
Menu
Auto Image
No
Menu
NEXT
Brit
Cont
*064
*064
NEXT
Menu
Detail
*064
NEXT
Menu
Figure 12.
Picture Controls Menu
ISS 608 and ISS 612 Seamless Switchers • Operation
MENU
Rotate to
or
select Program
or Preview
NEXT w Yes
selected
Rotate to
select Yes
or
or No
Press Next
to Confirm
NEXT
Rotate
to adjust brightness
&
Rotate
to adjust contrast
Rotate to
or
adjust the sharpness
of the image
17