Gun Arm Mounts; Change Gun Position (Front And Back); Change Gun Position (Left And Right) - Graco LineLazer V 200HS Operation

Gun Arm Mounts

This unit is equipped with front and rear gun arm
mounts.
Change Gun Position
(Front and Back)
1. Loosen gun arm knob and remove from gun arm
mounting slot.
2. Slide gun arm assembly (including gun and hoses)
out from gun arm mounting slot.
3. Slide gun arm assembly into desired gun arm
mounting slot.
ti27797a
3A3426EOperation
4. Tighten gun arm knob into gun arm mounting slot.
Make sure all hoses, cables, and wires are properly
routed through brackets and do NOT rub on tire.
Contact with tire will result in damaged hoses, cables,
and wires.
Change Gun Position
(Left and Right)
Removal
ti28020a
1. Loosen vertical gun arm knob on gun arm mounting
ti27796a
2. Extend mounting bar on opposite side of the
ti27795a
ti27798a
NOTICE
bar and remove.
machine.
Gun Placement
ti27799a
ti27919a
ti27800a
19