Dot Laser (If Applicable) - Graco LineLazer V 200HS Operation

Dot Laser (if applicable)

LASER LIGHT HAZARD. Avoid direct eye contact.
1. Remove battery cover.
ti27886a
2. Attach ON/OFF switch to desired location on the
handle bar.
3. Attach laser to desired location on the gun arm.
3A3426EOperation
4. Route wires from the switch to the battery and con
5. Connect the switch leads to the wire harness.
6. Reattach battery cover.
ti27815a
7. Turn on laser and position dot underneath gun
ti27816a
nect to the (+) and (-) terminals.
ti27888a
head.
Gun Placement
ti27818a
ti27887a
ti27817a
23