Gun Placement; Install Guns; Position Gun; Select Guns (Standard Series) - Graco LineLazer V 200HS Operation

Gun Placement

Gun Placement

Install Guns

1. Insert guns into gun holder. Tighten clamps.

Position Gun

2. Position gun: up/down, forward/reverse, left/right.
See Gun Positions Chart, page 18, for examples.
NOTE: When striping above a curb, the mounting clamp
can be rotated for clearance.
16
Another option can be to swing the gun out at an angle
and rotate the tip guard. This results in better visibility
for the user.
ti27777a

Select Guns (Standard Series)

3. Connect gun cables to left or right gun selector
plates.
a. One gun: Disconnect one gun selector plate
from trigger.
ti27778a
b. Both guns simultaneously: Adjust both gun
selector plates to the same position.
c. Solid-skip and skip-solid: Adjust solid-line gun
to position 1 and skip-line to position 2.
ti28129a
ti28130a
1
2
ti27780a
ti27781a
ti27782a
ti27782a
3A3426EOperation