Measure Mode (Standard Series) - Graco LineLazer V 200HS Operation

LineLazer V LiveLook Display

Measure Mode (Standard Series)

Measure Mode replaces a tape measure to measure
distances when laying out an area to be striped.
1. Use to select Measure Mode.
1
4
Ref. Description
1 Press to start measurement, Press to stop
measurement
2 Hold to reset values to zero
3 Scroll between main menu screens
4 Last measurement taken
30
2. Press and release
2
ti27902a
3 3. Press and release
ti27834a
backwards. (Moving backwards is a negative
distance.)
to six lengths are viewable.
ti27911a
. Move striper forwards or
to end measured length. Up
3A3426EOperation