Gun Arm Mounts; Change Gun Position (Front And Back); Change Gun Position (Left And Right) - Graco LineLazer ES 1000 Installation, Repair, Parts

Gun Arm Mounts

This unit is equipped with front and rear gun arm
mounts.
Change Gun Position
(Front and Back)
1. Loosen gun arm knob and remove from gun arm
mounting slot.
2. Slide gun arm assembly (including gun and hoses)
out from gun arm mounting slot.
3A4603F Operation, Repair, Parts
3. Slide gun arm assembly into desired gun arm
mounting slot.
ti27797a
4. Tighten gun arm knob into gun arm mounting slot.
ti27798a
Make sure all hoses, cables, and wires are properly
ti30326a
routed through brackets and do NOT rub on tire.
Contact with tire will result in damaged hoses, cables,
and wires.
Change Gun Position
(Left and Right)
Removal
1. Loosen vertical gun arm knob on gun arm mounting
bar and remove.
ti27796c
ti30328a
2. Extend mounting bar on opposite side of the
machine.
ti30327a
Gun Placement
NOTICE
ti30329a
23