Product Overview; Controls - Toro Groundsmaster 4500-D Operator's Manual

Product Overview

Controls

1. Brake pedal
2. Pedal-locking latch
3. Parking-brake pedal
Traction Pedal
The traction pedal (Figure
reverse operation. Press the top of the pedal to move
forward and the bottom to move backward.
To stop the machine, use 1 of the following
procedures:
•
Reduce your foot pressure on the traction pedal
and allow it to return to the center position. The
machine dynamically brakes to a smooth stop.
•
Tap or hold the reverse pedal briefly. This stops
the machine faster than dynamic braking.
Note:
In emergency braking situations, press the
service brake pedals in addition to using the reverse
pedal as stated above. This is the quickest method
to stop the machine.
Brake Pedals
There are 2 foot pedals that operate individual wheel
brakes for turning assistance, parking, and to aid in
better side-hill traction. A latch connects the pedals
for parking-brake operation and transport
Pedal-Locking Latch
The pedal-locking latch connects the pedals together
to engage the parking brake
Parking-Brake Pedal
To engage the parking brake,
pedals together with the pedal-locking latch and push
Figure 9
4. Traction pedal
5. Tilt-steering pedal
9) controls forward and
(Figure
(Figure 9).
(Figure 9) connect the
down on the right brake pedal while engaging the toe
pedal. To release the parking brake, press 1 of the
brake pedals until the parking brake latch retracts.
Tilt-Steering Pedal
Press the tilt-steering pedal to tilt the steering wheel
to the desired position, then release the pedal to lock
the adjustment
Key Switch
The key switch
O /P , and S
N REHEAT
g009979
1. Lift switches
(Groundsmaster 4700
machine only)
2. Lift switch (Groundsmaster
4500 and 4700 machines)
3. PTO switch
4. Key switch
g028454
9).
1. Power-point switch
Engine-Speed Switch
The engine-speed switch
change the engine speed. Tap the switch to increase
or decrease the engine speed in 100 rpm increments.
15
(Figure 9).
(Figure 10) has 3 positions: O
.
TART
Figure 10
5. InfoCenter
6. Hi-Lo speed control
7. Engine-speed switch
8. Light switch
1
2
Figure 11
2. Cruise-control switch
(Figure 10) has 2 modes to
,
FF
g208967
g028454