Figure 97
3. Lower and secure the operator's seat.
4. Replace the return filter at the right side of the
machine
(Figure
97).
5. Start the engine and let it run for about 2 minutes
to purge air from the system. Shut off the engine
and check for leaks.
Checking the Hydraulic
Lines and Hoses
Service Interval: Before each use or daily
Inspect the hydraulic lines and hoses daily for
leaks, kinked lines, loose mounting supports, wear,
loose fittings, weather deterioration, and chemical
deterioration. Make all necessary repairs before
operating the machine.
g036709
g031621
72