InfoCenter Icon Description
SERVICE DUE
Indicates when scheduled service
should be performed
The status of the engine rpm.
Info icon
Maximum traction speed setting
Fast
Slow
The fan is reversed.
Stationary regeneration is required.
The air-intake heater is active
Raise the left deck.
Raise the center deck
Raise the right deck
The operator must sit in the seat.
The parking brake is on.
The range is high.
Neutral
Identifies the range as Low
Coolant temperature (°C or °F)
Temperature (hot)
Traction or Traction Pedal
Not allowed
Start the engine.
The PTO is on.
InfoCenter Icon Description (cont'd.)
/
18
The cruise control is on.
Stop the engine.
Engine
Key switch
Cutting units are lowering.
Cutting units are raising.
PIN code
Hydraulic fluid temperature
CAN bus
InfoCenter
Bad or failed
Center
Right
Left
Bulb
Output of TEC controller or control
wire in harness
Over the allowed range
Under the allowed range
Out of range
Switch
Operator must release switch.
Operator should change to indicated
state.