Locating The Fuses - Toro Groundsmaster 4500-D Operator's Manual

WARNING
Charging the battery produces gasses
that can explode.
Never smoke near the battery and keep
sparks and flames away from battery.
5. When the battery is charged, disconnect the
charger from the power outlet and battery posts.
6. Install the positive cable (red) to the positive (+)
terminal and the negative cable (black) to the
negative (-) terminal of the battery
7. Secure the cables to the posts with bolts and
nuts.
Note:
Make sure that the positive (+) terminal
is all the way on the post and the cable is
positioned snug to the battery. The cable must
not contact the battery cover.
8. Coat both battery connections with Grafo 112X
(skin-over) grease, Part No. 505-47, petroleum
jelly, or light grease to prevent corrosion.
9. Slide the rubber boot over the positive terminal.
10. Close the console panel and secure the latch.

Locating the Fuses

The fuse block for the machine is located in the right
storage box
Figure 77
1. Loosen the latch for the cover of the right
storage box and raise the cover
expose the fuse block
(Figure 76).
decal125-4605
(Figure 78) to
(Figure 79).
1. Latch
2. Replace the open fuse(s) as needed
1. Fuses
3. Close the cover of the right storage box and
secure the cover with the latch
62
Figure 78
2. Right storage box
(Figure
Figure 79
(Figure 78).
g009985
79).
g010255