Toro Groundsmaster 4500-D Operator's Manual page 10

* This safety decal includes a slope warning required on the machine for compliance to the European Lawn Mower Safety Standard EN ISO 5395:2013. The conservative
maximum slope angles indicated for operation of this machine are prescribed by and required by this standard.
standard stability test in the static lateral and longitudinal tests with the maximum recommended slope indicated on the
decal. Review the instructions for operating the machine on slopes in the Operator's Manual and the conditions in which
the machine is being operated to determine whether the machine can be operated in the conditions on that day and
at that site. Changes in the terrain can result in a change in slope operation for the machine. If possible, keep the
cutting units lowered to the ground while operating the machine on slopes. Raising the cutting units while operating on
1. Warning—read the
Operator's Manual; do
not operate the machine
unless you have received
training.
2. Warning—read the
Operator's Manual for
information on towing.
(Affix over Part No. 112-5297 for CE* for 4700 series machines)
slopes can cause the machine to become unstable.
3. Tipping hazard—do not
drive on slopes greater than
21 degrees.
4. Keep the decks lowered
while driving down slopes;
always wear a seat
belt when operating the
machine.
127-6448
This machine complies with the industry
5. Warning—do not park on
slopes; 1) Engage the
parking brake, 2) Lower
the decks, 3) Turn off the
engine. 4) Remove the key,
5) Leave the machine.
6. Thrown object
hazard—keep bystanders
away from the machine.
10
decal127-6448
7. Entanglement hazard,
belt—keep away from
moving parts; keep all
guards and shields in place.