Safety And Instructional Decals - Toro Groundsmaster 4500-D Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Cutting/dismemberment hazard, fan—stay away from
moving parts.
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 115 to 149 N∙m (85 to 110
ft-lb).
1. Warning—wear hearing protection.
1. Warning—do not touch the hot surface.
2. Cutting/dismemberment hazard, fan and entanglement
hazard, belt—stay away from moving parts.
93-6681
93-7818
98-4387
106-6754
decal93-6681
1. Engine coolant under
pressure.
2. Explosion hazard—read
the Operator's Manual.
decal93-7818
decal98-4387
1. Warning—read the Operator's Manual, do not operate this
machine unless you are trained.
2. Warning—read the Operator's Manual before towing the
machine.
3. Tipping hazard—slow machine before turning, do not turn
at high speeds; lower the cutting unit when driving down
slopes; use a rollover protection system and wear the seat
belt
4. Warning—do not park the machine on slopes; engage the
parking brake, lower the cutting units, shut off the engine,
and remove the key before leaving the machine.
decal106-6754
5. Thrown object hazard—keep bystanders a safe distance
away from the machine.
6. Entanglement hazard, belt—stay away from moving parts;
keep all guards and shields in place.
5
106-6755
3. Warning—do not touch the
hot surface.
4. Warning—read the
Operator's Manual.
112-5297
117-2718
decal106-6755
decal112-5297
decal117-2718