Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
Media and Additional Parts
Description
Operator's Manual
Engine owner's manual
Parts Catalog
Operator Training Material
Note:
Determine the left and right sides of the machine from the normal operating position.
1
Replacing the Warning
Decal (CE Machines Only)
Parts needed for this procedure:
1
Warning decal
Procedure
On machines requiring European CE compliance,
replacing warning decal Part No. 112-5297 with
warning decal Part No. 127-6447 (for 4500 series
machines) or decal Part No. 127-6448 (for 4700
series machines).
Description
Warning decal
Hood-latch bracket
Rivet
Washer
Screw (1/4 x 2 inches)
Locknut (1/4 inch)
No parts required
No parts required
No parts required
Qty.
1
1
2
1
1
1
–
–
–
Qty.
1
Review before operating the machine.
1
Use to reference engine information.
1
Use to reference part numbers.
1
Review before operating the machine.
11
Use
Replace the warning decal (CE
machines only).
Install the hood latch (CE machines
only).
Adjust the roller scraper (optional).
Install the mulching baffle (optional).
Prepare the machine.
Use