Table of Contents
Advertisement
PS200
PORTABLE GAS MONITOR
CALIBRATION
9. CALIBRATION
9.1. General Description
The monitor has been calibrated for particular gases. Where any doubt exists, return the monitor to
an authorized distributor for calibration.
WARNING: ONLY AUTHORIZED PERSONNEL MAY CALIBRATE THE MONITOR.
Various calibration options are available:
1. Quick Calibration (if enabled)
2. Field Calibration (if enabled)
3. Manual Calibration using flexiCal Plus software
4. Automatic Calibration – the GMI Automatic Bump/Calibration Station, shown in
PS200 Auto/Bump Calibration
bump test and calibrate the monitor in a controlled manner whilst maintaining a record of cali-
bration results. For further details contact GMI or an authorized distributor.
NOTE: For further information on options 2, 3, and 4, please contact GMI or an authorized
distributor.
64171, Rev. 11/December 2019
Station, provides controlled delivery of gases permitting users to
Figure 9-1: PS200 Auto/Bump Calibration Station
Figure 9-1:
9-1
Advertisement
Table of Contents
