Teledyne PS200 Series Operation & Maintenance Manual page 24

3.3.1. BUMP DUE DATE (OPTION)
This configurable option is disabled by default but can be configured to:
• indicate briefly that bump test is due, as illustrated in
• indicate that bump test is overdue then pause awaiting user acceptance, as illustrated in
Figure 3-8: Bump
• force the user to switch monitor OFF when overdue.
This feature also comes with a factory-set option to display the number of days remaining until the
next bump is due.
To continue, press the R button once to acknowledge bump test is overdue.
To abort warm-up and automatically switch the monitor OFF, press the L button once.
3-4
Figure 3-6: Date and Time
Overdue;
Figure 3-7: Bump Due Date
Figure 3-8: Bump Overdue
PORTABLE GAS MONITOR
Figure 3-7: Bump Due
64171, Rev. 11/December 2019
PS200
OPERATION
Date;