Teledyne PS200 Series Operation & Maintenance Manual page 33

PS200
PORTABLE GAS MONITOR
ALARMS
4.4.1. 10 SECOND SWITCH OFF
The monitor must be returned to clean air.
NOTE: To avoid accidental switch-off in this dangerous state, the off cycle is increased to
10 seconds.
Switch OFF by pressing and holding both buttons. A timer counts down from 10 seconds to 0, and
the message GET OUT alternates with HIGH GAS, as shown in
Timer.
64171, Rev. 11/December 2019
Figure 4-3: Over Range Alarm
Figure 4-4: GET OUT/HIGH GAS Timer
Figure 4-4: GET OUT/HIGH GAS
4-3