Table of Contents
Advertisement
PS200
PORTABLE GAS MONITOR
RECHARGING THE BATTERIES
Charging/Comms Clip
Mini-USB to USB Cable
Figure 7-2: Connect Cable to Charging / Comms Clip
3. Connect the other end of the charging cable to the USB Power adapter (or suitable USB
socket).
Figure 7-3: Connect Cable to USB Power Adapter
4. During charging, the battery symbol
and 'CHARGING' flash in the display.
5. When charging is complete, the full battery symbol
and 'CHARGED' are displayed.
NOTE: The monitor will not damage if left connected to the charger.
6. Disconnect from the power source.
7. Grip the charging / comms clip and firmly pull it away from the monitor.
7-2
64171, Rev. 11/December 2019
Advertisement
Table of Contents
