Teledyne PS200 Series Operation & Maintenance Manual page 3

PS200
PORTABLE GAS MONITOR
LEGAL STATEMENT
LEGAL STATEMENT
Teledyne, the Teledyne Logo, Gas Measurement Instruments, GMI, and PS200 are registered
and/or unregistered marks of Teledyne Gas Measurement Instruments Ltd, also referred to as "the
Company."
All rights reserved. No part of this documentation may be reproduced in any form or by any means
or used to make any derivative work (such as translation, transformation, or adaptation) without
written permission from the Company.
Microsoft, Windows, Windows 2000, Windows Me, Windows XP, Windows NT, Windows Vista,
Windows 7, Internet Explorer and MS-DOS are either trademarks or registered trademarks of Mic-
rosoft Corporation in the United States and other countries. Solaris and JAVA are either trademarks
or registered trademarks of Sun Microsystems, Inc. All other products or service names are the
property of their respective owners.
DESCRIPTION
This Operations & Maintenance (O&M) Manual provides information for use only with the PS200
Portable Gas Monitor (or "the monitor").
LIABILITY
Every care has been taken in the preparation of this O&M manual, but the Company does not
accept any responsibility for errors or omissions and their consequences. Information in this O&M
manual is subject to change without notice. This O&M manual does not constitute a specification or
basis for a contract.
MODIFICATION NOTICES
The Company aims to notify customers of relevant changes in the product operation and maintain
this O&M manual up to date. Due to continuous product improvement, there may be operational
differences between the latest product and this O&M manual.
This O&M manual is an important part of the monitor, and it should be referred to for the life of the
product.
SOFTWARE
Any software supplied must only be used in this product and may not be copied without the written
permission of the Company. Reproduction or disassembly of such embodied programs or algo-
rithms is prohibited. Ownership of such software is not transferable, and the Company does not
warrant that the operation of the software will be error free or that the software will meet the cus-
tomer's requirements.
DISPOSAL ADVICE
Dispose of the monitor carefully and with respect for the environment. the Company will dispose of
the monitor without charge if the monitor is returned to the Company .
AREAS OF USE
Exposure to certain chemicals can result in a loss of sensitivity of the flammable sensor. Where
such environments are known or suspected it is recommended that more frequent response
checks are carried out. Chemical compounds that can cause loss of sensitivity include silicones,
lead, halogens and sulphur.
Do not use the monitor in potentially hazardous atmospheres containing greater than 21% oxygen.
64171, Rev. 11/December 2019 iii