TCS ISH3022 Product Information page 13

11/2012
1
power supply and control unit
shortly press
2
press until the deletion melody sounds
3
establish voice connection
to the front-door station
4
shortly press
a) Not necessary, if the bell buttons have not been programmed, comp. product information of the front-door station.
1) If there sounds a Progsperr tone instead, the front-door station is equipped with a programming lock.
The programming lock can be deactivated only with the Service Device TCSK-01 or the configuration software
configo™.
2) Newly developed front-door stations (as of 2009) respond to that with a positive acknowledgement, when the serial
number of the indoor station was received (see product information of the front-door station).
*) for device specific indication modes of the front-door station see product information of the front-door station
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de
FAX: +49 (0) 41 94/ 9 88 129
LED blinks
1)
Programming via voice connection
shortly press
2)
the button ...
LED is on
13
Initiate
programming mode of the system is switched on
a)
Delete a button
release
... a ring tone sounds at the front-
door and indoor station
End
programming mode of the system is switched off *
put down
1)
the handset
Subject to technical changes.
PI_ISH3022-uk
)