Rear Brake Calliper; Front Brake Calliper - PIAGGIO XEVO 125 Euro 3 Service Station Manual

Braking system
This section è is devoted to the description of the braking system components.

Rear brake calliper

Removal
- Remove the muffler.
- Remove the two rear brake calliper devices fas-
tening them to the support as shown in the photo-
graph.
N.B.
SHOULD THE BRAKE CALLIPER BE RE-
PLACED, BEFORE REMOVING THE FITTINGS
FIXING THE CALLIPER TO THE SUPPORTING
BRACKET, FIRST LOOSEN THE OIL HOSE FIT-
TING AFTER HAVING EMPTIED THE SYSTEM
OF THE CIRCUIT BEING INSPECTED.
Refitting
- To fit the calliper, follow the above operations but in reverse order.
Locking torques (N*m)
Rear brake calliper fixing screws 20 ÷ 25 Rear brake calliper-pipe fitting 20 ÷ 25

Front brake calliper

Removal
- Remove the two retainers fastening the front
brake calliper to the support as shown in the pho-
tograph.
N.B.
SHOULD IT BE NECESSARY TO REPLACE
THE CALLIPER, FIRST LOOSEN THE FITTING
CONNECTING THE PIPE TO THE BRAKE CAL-
LIPER.
Refitting
- To fit the calliper, follow the above operations but in reverse order.
Locking torques (N*m)
BRAK SYS - 2
XEVO 125 Euro 3