Front Fork - PIAGGIO XEVO 125 Euro 3 Service Station Manual

Suspensions
IF THE HANDLEBAR IS BEING REMOVED TO
REMOVE THE STEERING, IT IS ONLY NECES-
SARY TO TILT THE HANDLEBAR FORWARD
ONTO THE FRONT PART OF THE VEHICLE
WITHOUT REMOVING THE PARTS FITTED SO
AS TO AVOID DAMAGING THE SHAFTS.
Refitting
Carry out the above operations by working in the reverse order from those of the removal.
Locking torques (N*m)
Handlebar fixing screw (*) 43 ÷ 47

Front fork

Removal
- Remove the front wheel.
- Remove the handlebar and tip it onto the shield back plate being careful not to damage the plate.
- Using the appropriate tool, loosen and remove
the upper ring nut, the space washer, the counter
ring nut and the spacer ring.
- Extract the fork.
N.B.
TAKE CARE TO SUPPORT THE FORK SO AS
TO PREVENT IT FROM COMING OFF ABRUPT-
LY
Specific tooling
020055Y Wrench for steering tube ring nut
See also
Removing the front wheel
Overhaul
- With the 10 mm hexagonal wrench for internal
parts loosen the upper stem closing cap.
SUSP - 6
XEVO 125 Euro 3