XEVO 125 Euro 3
LUBRICATE THE FOLLOWING PARTS WITH
GREASE: SPRING COUPLING PINS, BUSH-
INGS ON STAND FIXING BRACKETS.
Recommended products
AGIP GREASE PV2 Grease for control levers
on the engine
White anhydrous-calcium based grease to protect
roller bearings; temperature range between -20 °
C and +120 °C; NLGI 2; ISO-L-XBCIB2
Locking torques (N*m)
stand retaining bolt 20 ÷ 25
Side stand
REMOVAL
- Uncouple the centre stand return spring;
Remove the screw shown in the photograph
FITTING
To refit, carry out the removal operations in re-
verse order and comply with the specified torque.
Locking torques (N*m)
Side stand fixing bolt 35 ÷ 40
Suspensions
SUSP - 23