Rear; Removing The Rear Wheel; Remove The Full Muffler Assembly - PIAGGIO XEVO 125 Euro 3 Service Station Manual

XEVO 125 Euro 3
- Insert the a new plate and a new dust guard in
the steering tube
- Insert a new roller bearing in the roller tube.
- Using the special tool and a mallet to move the
dust guard and the bearing in abutment.
Specific tooling
006029Y Punch for fitting fifth wheel seat on
steering tube

Rear

Removing the rear wheel

Remove the full muffler assembly.

- Remove the screw fixing the right-hand shock
absorber to the bracket
- Remove the two screws supporting the brake
calliper on the bracket
- Remove the cotter pin, the cap, the wheel axle
fixing nut and the outer one of the two spacers.
- Remove the screws fixing the mudguard and the
brake pipe to the bracket.
- Remove the screw fixing the brake pipe to the
bracket.
- Remove the two screws fixing the bracket to the
engine.
- Disconnect the connector from the wheel turning
sensor.
Suspensions
SUSP - 15