XEVO 400ie
Rear brake calliper
Removal
- Rest the scooter on its centre stand and ade-
quately support the rear part of the scooter.
- Remove the wheel.
- Unscrew the air filter to the crankcase retainers.
- Unscrew the left shock absorber lower retainer.
- Release the screws from the safety washers and
unscrew the crankcase fixing screws indicated.
- Remove the calliper together with its supporting bracket.
N.B.
SHOULD THE BRAKE CALLIPER BE REPLACED, BEFORE REMOVING THE FITTINGS FIXING
THE CALLIPER TO THE SUPPORTING BRACKET, FIRST LOOSEN THE OIL HOSE FITTING AF-
TER HAVING EMPTIED THE SYSTEM OF THE CIRCUIT BEING INSPECTED.
Refitting
To fit the calliper, follow the above operations but in reverse order.
Locking torques (N*m)
Rear brake calliper fixing screws 20 ÷ 25 Rear brake calliper-pipe fitting 20 ÷ 25 Rear shock
absorber retainer to the chassis 38 - 46
Front brake calliper
Removal
- Remove the two retainers fastening the front
brake calliper to the support as shown in the pho-
tograph.
N.B.
SHOULD IT BE NECESSARY TO REPLACE THE CALLIP-
ER, FIRST LOOSEN THE FITTING CONNECTING THE PIPE
TO THE BRAKE CALLIPER.
- Repeat the same operations for the other front calliper.
Braking system
BRAK SYS - 283